Parts and Accessories


 

PRINDLE 1/2 Round MAST BEARINGS

** 10 in stock. ($22. each) **

________________________________________

Smaller Nacra MAST BALLS

We have the original small (1-1/4″) mast balls in stock for the very old Nacra 5.0’s/5.2’s/5.8’s  ($28.each) (30 in stock)


STANDARD NACRA MAST BALLS – IMPROVED THREADING

1-1/2″ mast balls for Inters and Nacras  ($18.50) (100 in stock)

________________________________________

14-1/2″ NACRA Stainless Steel DOLPHIN STRIKER RODS

$58.50  (40 in stock)



HULLS

New White NACRA 6.0na PORT HULL  $3,000.

White NACRA (Inter) 20 damaged Starboard hull (repairable)  $400.


BEAMS, SPIN POLES, EXTRUSIONS, BOOMS

NACRA CARBON FIBER adjustable tiller extensions (sold out)

Arriba stick FX-04 $190. (1 in stock)

NACRA 5.2 front and rear round beams.  Rear with traveler car included $250.(used).  Front with new style dolphin striker and V-bar $300. – (used)

Hobie 16 – Front and rear crossbeams and side rails – silver – includes corner castings – used – $200. complete or will part out – Front with castings and dolphin striker $150., rear with traveler car and castings $150., (1) side rail $50.

N-20 BOOM EXTRUSION – (out of stock)

N-20 Boom complete – (out of stock)

N-18/20 Black spinnaker pole Extrusions (new)  (5 in stock – $125.)

NACRA F-18 INFUSION Boom Extrusions – BLACK – (2 in Stock)  $87.50

N18/20 MIDPOLE SNUFFER HOOPS AND BAGS – (3 Bags in Stock – 1 Hoop in stock)

Nacra 17 Olympic – MIDPOLE SNUFFER BAGS  – RACE – (1) IN STOCK

Nacra 17 Olympic – Boom (1) in Stock

NACRA 5.2 boom complete $125. (used)

TILLER CROSSBAR PRINDLE (1 in stock)

TILLER ARMS FOR NACRA, PRINDLE, INTER (Various tillers in stock)

TILLER CROSSBAR EXTRUSIONS  – Black – (7 in stock)  $86.


END POLE SNUFFER BAGS

NACRA F-17/Inter 18 – Black mesh 11′  $165.  (1 In Stock)

Nacra 20 End pole snuffer bags – 12′   $165.   (1 In Stock)

MIDPOLE SNUFFER BAGS

Mylar ($180. or black mesh ($155.) (In stock) for Nacras

MIDPOLE SNUFFER SUN COVERS

For the NACRA midpole spinnaker snuffer system.  Gray – $175.


SAILS – BATTENS

Nacra 17 Olympic – Jib (1) in Stock  – White

Nacra 17 Olympic – Snuffer bag (1) in stock –

Nacra 17 Olympic  – Spinnaker (1) red, (1) blue) both with holmenkol

Nacra F-18 Jib Small Smoke ($567.85)

Nacra F18 Infusion MKII Jib – Silver

Nacra F-18 INFUSION Jib – Small, roller furling – Smoke  ($775.) 

Nacra F-18 Spinnaker – Used  – WHITE – Large – ($900.) 

Nacra F-18 Infusion MKII Midpole Spin –  by Performance Sails –  Blue or Red – (2) in stock

Nacra F-16 Batten Set (1) in stock

Nacra 17 Olympic – Batten set – Standard – (1) in stock

Nacra 17 Olympic  – Soft batten set (1) in stock, Hard batten set  (3)

Nacra F-18 Infusion MKII  Batten Set (2)  in stock


TRAMPOLINES

Nacra 17 Olympic – Trampoline – Gray – (1) in stock

Nacra 5.0 – Trampoline (1) in stock 

Prindle 16  – Trampoline (1) in stock – with port cut-outs 

Nacra/Inter F-17 – Trampoline (1) in stock – Rear lace

Nacra 20 – Trampoline (1) in stock – Side lace


MASTS

NACRA 5.2 mast – Used, with diamond wires and spreader bar, mast base and mast head.  Straight.  $400. Pick up only. Will not ship.

Hobie 14 Mast  – New H-14 masts ($275.)  Includes main halyard.  One left.  Note: Pick up only.

Nacra Infusion mast – Used – With all the attached fittings except the mast base or diamond wires.  $700.  Pick up only.

Nacra 5.8na mast  – Used  – With fittings- Scratched but straight. $400.


NACRA 5.2 Parts

Used Nacra 5.2 front and rear crossbeams including traveler car. ($300. and $250.). New larger mast step rod and associated parts,

Used rudders (need a little fiberglass repair at the bottom) ($65.each)

Used rudder castings ($70.)  Castings and rudders can be used on most older Nacras.

Used boom ($125.)

Used mast ($400.)

Used Aluminum extendable tiller – Works like new ($40.)



CAT TRAX CRADLES

Cradles for Cat Trax beach wheels or  trailer installation.  Regular and wide cradles for Inters and F-18’s/Infusions.  In stock. Also SUPER WIDE for the Nacra Olympic 17 and Falcon 18 for the beach wheels or trailer.


 

CAT TRAX  

 Cradles for wide hulls or standard size.  $149./ pair – standard size. Cradles for trailers. Also Replacement tires with or without rims.  Tubes, white wheel bearings.   ALUMINUM plates for attaching cradles to trailers ($8.50 each).  Rubber hose and end caps for boats not needing cradles.


RUDDERS, DAGGERBOARDS

NACRA, INTER, NACRA F-18, PRINDLE and Hobie

Newest style 40″ NACRA (Infusion/F18) Rudders  (2 in stock) 

NACRA 17 Olympic – Tiller cross bar (2 in stock) ($158.71)

NACRA 5.8/6.0 Daggerboard (1 New) (New list price – $771.)

 Nacra 18/20 Daggerboard  (1 in stock – $771.) 

 Nacra Older F-18 Daggerboard (1 in stock $750.) 

Nacra F-18 INFUSION Daggerboard – for MKI (out of stock) 

Nacra F-18 Infusion MKII – long daggerboard (1 in stock) 

NACRA 5.8/6.0 Rudders (1 New) 

H-14/16/18 Rudder (1 New)  ($220.)

NACRA Original Style (N5.0/5.2/5.5/5.7/5.8/6.0) Rudder Casting  (2 used)

PRINDLE Rudder Castings  (1 New)  ($250.)

INTER Rudder Casting – Upper  (5 in stock) Lower (5 in stock)

NACRA 17 Olympic Rudder Casting  (newest design)  (1 in stock)

NACRA 17 Olympic Rudder casting and tiller arms complete (several in stock)

NACRA 500 – Tiller arms – Black – In stock

Nacra (Inter) 20 – Tiller arms – 10 in stock. Can be cut to fit smaller boats.

Nacra 6.0 and other older models – Tiller arms – (In stock)

Some old style Hobie 14/16 upper and lower rudder castings and tiller arms but not the old H-18 type.


ROLEEZ Wheel

One partial hub assy., spare axle sections (New)

(1) new tire and hub  17-18″ x 7-8″   (Aqua)  $79.



 

HOBIE GLASS BATTENS – MANY in STOCK

H14/16/18. Random lengths


TRAPEZE HARNESSES – Aquata,, Magic Marine and Forward ZIP

Tramp Bag, curved zipper, Red 38″ x 19″ $38.

SWIFT -Trapeze harnesses. Red. Best for women or kids.


H 14/16/18 Parts
Misc. parts. Several H-18 old style rudder cams and cam kits.  SS pins for rudders. H-14/16 corner castings, H-14/16 rudder castings (no old style H-18 rudder castings left), tiller arms, rudders, older style gudgeons, jib traveler adjustment kits, lots of crossbeam bolts, lots of very long aluminum rivets, H-18 anchor plate kits, H-18 rear crossbeam and various other parts. 


 

Contact:
Rick Bliss 85 Oakland St. Mansfield, MA 02048 508.944-6220 Email: rickbliss@verizon.net